Takeoff ToolTAKEOFF TOOL
Sign in

Millwork, casework and cabinet takeoff software

A millwork takeoff comes from the interior elevations. Each elevation shows the cabinets, the tops and the trim for one wall. The errors come from elevations, the finish legend and the spec naming different materials or grades.

Opening

This trade is not open yet. We are building it with founding contractors, who use Takeoff Tool three months free. The lists below show what the takeoff covers and what we teach it first.

Join as a founding contractorHow it works

The spec sections it reads

  • 06 20 00Finish carpentry
  • 06 40 00Architectural woodwork
  • 06 41 16Plastic-laminate-clad architectural cabinets
  • 12 36 00Countertops

What a millwork and casework takeoff covers

  1. 01

    Casework runs

    Base, wall and tall cabinets by elevation, with length and type.
  2. 02

    Countertops

    Each top with its material, length, splash and cutouts.
  3. 03

    Reception desks and custom pieces

    Counted one by one from the enlarged plans and details.
  4. 04

    Wall panels and trim

    Paneling, wood base, chair rail and standing trim by room.
  5. 05

    Shelving and closets

    Shelves, rods, standards and brackets.
  6. 06

    Finishes and hardware

    Laminate and veneer selections, pulls, hinges, slides and locks.

The conflicts we teach it first

These are the conflicts estimators in this trade tell us cost them money. They are the first rules we build with founding contractors.

  1. 01

    Plan and elevation disagree

    Casework on the floor plan with no interior elevation.
  2. 02

    Spec and elevation disagree

    A grade or core material in the spec that the elevations or details do not match.
  3. 03

    Finish legend and elevation disagree

    A laminate or veneer tag on an elevation that the finish legend does not list.
  4. 04

    Countertop scope

    Solid surface or stone tops shown on your elevations and specified in another section.
  5. 05

    Missing dimensions

    A cabinet run with no length, height or depth on any elevation.
  6. 06

    By others

    Sinks, appliances, equipment or in-wall blocking that the elevations show and do not assign.

Millwork and casework: common questions

Can I use Takeoff Tool for millwork and casework takeoffs today?
Not yet. Millwork and casework is a founding trade. We build each trade with working estimators, so the tool learns how the trade really bids. Founding contractors use it free for three months while we build it with them.
What do you need from a founding millwork and casework contractor?
An hour or two of your estimator's time, screen shared, while they do a real takeoff. Plus a set of past bid packets with the finished takeoffs. We use them to check the tool against work you already trust.
What does it cost after the founding period?
The standard price is $2,500 per seat per month. It is a flat fee. There is no charge per takeoff.

Guides and solutions

CSI divisions for this trade

Other trades

Help us build millwork and casework takeoffs.

Founding contractors use Takeoff Tool three months free.

Start a trialBring your trade